• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Conroe @ Joe Camel's house

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
well, that surpases the ****ty *** results @ XS
there's hope for retail conroe yet! :D
ill be watching this thread
very, very, very, very, very, very(6x) closely
 
ASUS P5W DH no volt mods but better cooling

Storm G5 (silver), Laing D4 pump @ 14V, twin single pass "dual-heater cores" in series, 4x 130CFM fans

Mr zippy 700w PSU







pict0260hy8.jpg




will edit more stats soonish


this rig but not this Vid card:



pict0259tb8.jpg



.
 
Last edited:
Retails are Step 6 (B2).

JC, I am not sure what all you've been trying, but try these if you haven't already:
Performance Mode = Standard
PCIe = AUTO (default)
PCI Freq = 33.3MHz

FSB Termination = AUTO (little to no reason to up this and it usually hurts more than helps)
MCH Voltage = 1.65V
HyperPath3 = Disabled

Disable C1E, Thermal Control, EIST and all that stuff under CPU Config. Just leave the microcode update enabled.
 
8M stable, awesome!!! Last we talked you couldn't even do it 1M. What setting(s) did you change to get such a big leap in stability?

Way to pwn the XS retail results. :D
 
[OT]
Qubix said:
C2D E6600 on pre-order $350
Asus P5WDH on the way $250
OCZ 800MHz DDR2 memory sitting on my table $200

Waiting for July 27th... agonizing

Love your sig man, feel your pain! :santa: [/OT]




(and JC subscribed~ GL)
 
Gautam said:
8M stable, awesome!!! Last we talked you couldn't even do it 1M. What setting(s) did you change to get such a big leap in stability?

Way to pwn the XS retail results. :D

All of the XS retail results are Dual Prime stable, not 1m or 8m.

Some X6800 owners saw 55C load on high end water cooling, 1m and 8m will not stress cooling enough to show stability, and clearly only one thread will not either.

Show highest Dual Prime stable... It wont be 4ghz.
 
All of the XS retail results are Dual Prime stable, not 1m or 8m.
Yes, XS is all about stable OCs, LOL.

Who started all this about "stable" anyway? Unless he went from water to phase, anyone thinking it went from being barely stable enough for 1M SPi to stable for dual 32Ms or P95s ( :rolleyes: ) is living on another planet.
 
I am only pointing out that Each retail X6800 @ XS did "worse" because the users wanted 24-7 rigs that were "stable"

Many people have stepping 5 CPUs that do ~4.1 on air.(Pi stable)

Andre Yang's retail X6800 did ~3.7 dual prime stable, but 4ghz + 1m/8m.
 
Last edited:
Back