Are you an Ubercloxx0r ???

ima brown belt
1.p4 2.8AE to 3.8
2.p4 3.2E to 4ghz+ (working on it now)
3.p4 2.8E to 3.9 toped out
4.6800nu modded to a NV5 with AS5
5.6800GT modded to a maze 4 waterblock
6. pIII 900Emhz to 1.12 ghz on a micro atx acer board (basically impossible...but i did it)

A few posts ago (but a long time ago) - according to TollhouseFrank - I have 9 points.

In addition:
Case mod: drill holes to base of case for relocation of harddrive + modded housing to fit 2 harddrives instead of just 1 + LED light switched from red to blue because the red one died

Videocard mod: flashed BIOS to enable temp probe on 6600GT + lapped heatsinks + voltage mod

Fan mod: 2 pin to 3 pin so it fits onto the motherboard.

Around 12 points. BLACK.

Hmm funny I never saw this thread before.. Anywho
486 100 to 133 1 point
P166 to 200 1 point
K6-2 333 to 450 K6-2 400 to 525 K6-2 450 to 550 1 point
desktop P-m dothan 1.6 - 2.4 P-m dothan 1.7 to 2.8 1 point
laptop dothan 1.6 to 1875 softmod 1 point
Too many xp's to list Just a couple any way
xp 1.6 to 1912 Pally, 1.43 -187x (several) duron 900 @ 990 etc 1 point
2* mobile 2400's SMP modded, Max Mult modded 1.8 to 2.35
2* 2400 Tbred-b SMP modded (already done when i bought them) also 2.35
So for duallage 1 point

6 in. blow hole in cases various case mods for PSU's, mobo fitting, etc 1 point
vmod for vcore on KT266A board using larry quins infamous POT setup 1 point
soft OC vid cards 1 point
POT adjust PSU's 1 point
Home brew phase change 1 point
flashing burner for higher speed 1 point
Oh yeah.. wire mods on various procs 1 point (both dothans right now)
modding bolts to make stands for uber aircooling on dothans along with various BM mods, adding sinks to board etc1 point

Thats what I can remember right now.. will update with more later..
15 there so blackage for me

I was thinking that I already posted in this thread, but I guess not. Here's mine:
1) 486/586- 486DX/2 66MHz to 80MHz in an old Packard Bell
2) Pentium Classic to MMX- Pentium 200 w/MMX to 233 on a FIC board, to 300 on an Asus P5A-B
3) AMD K5-K6- K6 266MHz to around 400MHz, .2V overvolt
4) K6-2 and up- K6-2 350MHz to 400MHz on an IBM, could do 450 on a different board
5) AXP to Barton- Applebred Duron (after Thunderbird) 1.6 to 2.3, Sempron in sig, another Applebred Duron to 2GHz
6) NB Cooling mod- lapped nb and nb heatsink, applied silver paste, changed mounting
7) Video card cooling mod- put a VF700-AlCu on my FX5700LE, applied silver paste
8) Pin mod/wire tricking- did a pin mod on an AK32VN for more vcore, couple of bridge mods
9) Case cooling mod- cut out part of the front of my X-Dreamer 2 for more airflow to the 2 front 80mm fans
10) Soft modding- soft modded my FX5700LE to a Quadro FX1100

That gives me a red belt, I guess that is alright for not having a computer over 200MHz until early-mid last year.

Update 11/27/05:
11) Motherboard volt mod - VDIMM vmod on AN35N Ultra for 3V
12) Motherboard volt reg cooling mod- added sinks on an AN35N Ultra
13) AMD 64 bit oc: Sempron64 3000+ @ around 2.75GHz

Black belt now

w00t my first was an intell at 25mhz i bumped to 33mhz. Then my 1ghz tbird desktop, 2000+xp dual, then my 1.4 ghz opterons! Guess that makes me a green belt.

P1 133mhz to 180mhz -1
Duron 700mhz to 791mhz - 1
P4 Celeron 2.4 ghz to 4.3ghz -1
P4 3.2ghz to 4.2 ghz -1
2 dremeled blowholes in top of mid-tower - 1
Waterblock on 875 NB - 1
WB on 6600GT - 1
Caseless, fanless PSU for the above P1 - 1
A64 3800+ to 2.5ghz (small steps, I will take it to 3.0) - 1


9 (or 8, since 2 P4's) for a RED BELT!

1- Overclocked a few Athlon XPs
1- Overclocked an Athlon 64
1- Performed northbridge cooling mod
1- Performed a video card cooling mod
1- Performed a video card volt mod
1- Cut a 80mm blowhole and a 120mm blowhole

=6

I am a brown belt!

Can I count cutting and soldering many PSU wires for better cable management as wire tricking? I don't really know what wire tricking is.

1) Overclocked my friends P4 to 2.5 ghz
1) Overclocked AMD k5-k6 to something....
1)Overclocked Amd Athlon Duron to 1.5 ghz
1) Amd Athlon XP Barton 2500 + to 2.3 ghz
1) Overclocked another friends AMD Athlon 64 939 venice

Northbridge cooling mod - lapped and replaced heatsink on nf7-s
Videocards cooling - replaced and modding cooling for memory and core.
Case cooling mods - made own custon case, cut blowhole, cut window, mods.

trhat makes me..... A RED BELT! MUAHAHAAH

I might be black if there was wiremanagement.

EDIT: +1 for PSU MoD: Changed out fan of some Generic PSU.

EDIT AGAIN: +1 for Wire tricking
+1 for heatsink lapping

TOTAL: 11

Overclocked CPUs:
P42.5ghz->2.8ghz
Athlon Thunderbird 800->1ghz
Athlon XP 2400+->2.3ghz
Athlon XP 2600+->2.6ghz
Lapped all 4 CPU(P4 IHS removed).
Wire trick on the NF7-S v2


Northbridge cooling mod. x2 Soyo Dragon Plus, NF7-S v2
Video Card cooling mod. x3 Ti4600->Intel HSF, FX5200->above T-Bird's HSF, X800->WC
Videocard softmod. Ti4600 bios OC.


Red for me.

I just added up my points for the first time and it seems I am already a Brown Belt Ubercloxx0r.

Thunderbird 1.4 oc'ed to 1540
XP 2600 Mobile oc'ed to 2400 and up
custom made NB cooler
homemade ramsinks for vid card
L12 mod
successfully lapped 2 heatsinks, unsucessfully lapped 1 heatsink
various case cooling mods

all this in under 3 years from the day I started OC'ing.

P1 mmx 166 @291, i mis that board. supermicro P5mma98.
cyrix 133 mhz, i think it was either a M1 or2. 133@166
K5 (i tihnk 5, mighta been 6) 100@120
k62 333@400, 450 at 575
P2 class, celeron 333@400. grandma needed a little faster of a web machine
P3 class: celeron 666 at 800 in dad's old emachines board, softfsb to raise bus to 80 mhz
P4 2.0 @ 2.4 friends comp, i OC's his CPU, put in more ram, and OC's his R9600se
athlon slot A: 700@800 "keeping busy at work" with a board and cpu i found in the back
Duron 900@1200
AXP 2100@2400 mhz, 2400+ at 2300mhz both in my main comp, murdered the first 2100, the 2400 is still alive and kickin.
non x-86: A64 2800+ clawhammer S754 at 247x9 2223mhz
Northbridge cooling: added a 40mm fan to NB of an A7N8X DLX r1.4
vid card cooling mod: added vantec iceberq to fx5200, radeon9200se and fx5500U
vid card Vmod: pencil modded GF3 ti200
pin modded 2400+ mentioned above, bridge modded the 2100

15 in first post

case cooling: cut grills off of my antec 1040B
PSU mod: replaced fan in antec smartpower 400, civered 92mm fan hole and cut out back so it pulled air completely across sinks
laptop OC: compaq evo N115 duron 1200@1400

after the addition 19 points.

so that makes me black belt. and a brown on top of that. lol.

I'd say i have FAR too much time on my hands. and too much old hardware floating around town, and friends that manage to come into posession of said hardware and bring it to me.

BIOS vid card OCs count as softmods? if so that means i have another point, bios OC'd a ti200 to i tihnk it was 250/533 if this holds up, im at 20 points.

Red Belt...My electronics class had liek one of every single (older) chips listed when i was in high school. I got to mess around with all of them because we did nothing.

586 = 1 P166
Intel Pentium Classic = P2.0 Willimette
AMD K6 II = 450
PIV = Present OC in Sig
NB Cooling Mod = AS5 and Lapped Present NB Cooler In Sig
Vid Card Cooling = Lapped and AS5 on Present 6800GT in Sig
Mobo vMod = vDroop
Mobo vMod = vOfs
Mobo vMod = Caps
Graphics vMod = 1.4 3D voltage softmod
Lapping a CPU = Lapped My CPU just lastnight (current Prescott 3.2 in sig)
Case mods = Removing fan grilles from my Xaser III
Softmodding a Vid Card = Gainward Golden Sample BIOS on current 6800GT in sig

= 13 Black belt Ninja with Scorpion

Pentium 200 overclocked to 233 (fsb increase, maxed mobo)
Pentium 4 (Celeron 2ghz) Overclocked to 2.4 (FSB increase, didnt mean to overclock)
Pentium 4 2.6c @ 3.4ghz, P4C800-e
Dothan 715 @ 2.4+ (p4p800se @ 160 fsb)
Dothan 730 @ 2.5 (210*12, P4C800-e, P4P800SE)
Dothan 750 @ 2.7ghz (270*10, P4C800-e)
Celeron M @ 1.9ghz (120 fsb, P4C800-e)
AMD thunderbird 1.33 @ 1.4ghz (166*8.5, KX7333-r)
AMD t/bred B 1700 @ 2ghz, KX7333-r and NF7-s V2.0
AMD t/bred B 1800 @ 2.5ghz - DFI UI air cooled, 2v vcore
Various Barton M's one to 2.8ghz, one to 2.2ghz. (these arent mine but are housemates)
A64 3500 (newcastle) @ 2.7ghz, 2.6 stable (see sig)

NB cooling - Added zalman sink (does this count? lol)
Vmods:
mobos:
KX7 333-r - vcore to 2v, vdimm to 3.3v line
NF7-s - Vdimm, vGPU, vCore (mosfets sinked, zalman sink on NB)
P4C800-e - vDimm, vDroop
gfx cards:
Ti4200 - vGPU, vMem (2.2v/3.5v max)
9500NP - vGPU, vMem, vRef, vDDQ
9800pro - vGPU, vMem
GF2 - vGPU
9500NP Softmodded to Pro

No idea on points, any ideas :S Do things like modded GFX coolers count? In which case add one to each of the gfx cards listed above...

I overclocked a

2.0 Celeron to 2.04 ghz , its my friend's, but ow well
2 Athlon XP 1800+s, 1 Palo and 1 Throughbred, one to 2000+ and the other 2100+ (thats wat the mb tells me anyway, K7VM2, ASROCK)
Barton 3000+ to 2280 mhz
Northbridge cooling mod
Heaps o wierd Video Card cooling mods
Voltage reg cooling mod
Pin mods or wire tricking
Lapped my friend's Cele

EDIT: Does enableing the temp probe in my 6600GT count as 1? if so, im at 9
EDIT: A64 Dual core +1

10 for me
So that puts me at 8 yea?

just updated mine to include overclocking my A64...up to 13, and still keepin' my blackbelt

My OCing successes:
OC'ed 25 MHz '040 to 40MHz on 2 different Centris 650 systems
OC'ed AMD K6-2 500 to 550 and stable until I sold it.
Oc'ed P4 from stock 2.4 GHz
Also lapped that P4 so it's as smooth as newborn baby's butt.
OC'ed AMD Athlon from 1.2GHz until the mobo (or CPU) died.
Added fan to some northbridge heatsink
Replaced stock FX5600 hsf with something better
FX5600 also had both volt and speed mod.

8 points total... nice.

Lets see...I cannot fully remember how much I overclocked but here is my list:

1-Intel 8086 (still have the board from college sitting around, easy to overclock, just pull out the crystal and put in a faster one!)
1-The wifes old 486 (this was a joke!)
1-My first computer was a Pentium Classic non-mmx, upgraded it to mmx
1-My father in-laws old Intel PII
1-My last computer was a Intel PIII (crappy overclocker)
1-My current rig is an Athlon Barton (loving the overclock on this thing)
1-Helped one friend with an Athlon Slot A
1-Helped another friend with his current Intel PIV

1-Northbridge cooling on 3 of the rigs above
1-Video Card cooling on my current vid card and an old daughter card I had
1-Wire trick on my current rig


Thats 11 points....darn one from Black Belt

Okay here's i go:

INtel Pentium Classic 75mhz @ 90Mhz - just disapointed with intel after that
AMD k6-II 500 @ 550 - my first AMD oc ever just multi adj.
AMD 750 slot a Thunderbird @ 79*mhz - just fsb upping, better ram
AMD Athlon XP tbred-a 1.5Gz @ 1950Mhz , Performance cooler, more volts
AMD Barton 2800+ 2.02GZ @ 2400Mhz, A7N8X WC'd w/ swifty block.
now on my way back to intel: updates as of 10/08
AMD x2 6000+ 3Ghz @ 3.3Ghz M2N32-SLi delux
AMD x2 BE-2400 2.4Ghz @ 3.0+Ghz M2N32-Sli delux
AMD x2 4000+brissy 2.0Ghz @ 3.1Ghz M2N32-Sli Delux
Intel E6600 b2 2.4Ghz @ 3.8 bench stable 3.6 24/7 Asus P5Ql-pro / xfx 680i Sli A1




A7N8X Rev 2.0:
CPU voltage mod - solderd myself
Mem Voltage mod - **
NB cooler removed and stock AMD HS applied with AS epoxy
Mosfets cooled with copper coolers made by myself from fins of my TT Volc 7,
applied with AS epoxy.

HSF's:
Volcano 7+ : lapped
DD maze 4 : lapped
TR 947U : lapped

Antec Viewplus case:
Top blowhole cutout for 120mm
Front bottom cutout for 120mm
All 80mm fan grils liberated:
And not that this will gimme any points but case was TOTALLY
unriveted and re-riveted for custom interior paint job.

Will add more after my 64 parts arive

but i think = 15 (tell me if wrong)

Although I have only been overclocking for about two years, I've overclocked quite a few cpus, let me see

a pII 266 to 333 I think
a pIII 730 to 850+
a Athlon xp1800 to 1.7ghz
2200 to 2.15ghz
2600m to 2.6ghz
2600m to 2.5ghz
2600m to 2.7ghz
a Athlon 64 dtr 3200 (laptop) from 2.0ghz to 2.2ghz
64 x2 3800 to 2.9ghz not done just yet.
64 Winchester from 2.0ghz to 2.2ghz extremely crappy mobo(overclocking wise anyway)
I'm sure there I'm forgeting something.

I've lapped my si-97, Tt volcano 12 and the cheapest copper hsf from newegg.

I've added ramsinks to a 9800pro, and tapped and modded a silencer on it, and before that I had a duct made of paper, electrical tape and staples.

Modded my case to fit a fa on the side, a whole to get my tubing to go out of the case to my rad which I mounted on the sidepanel of the case.
Does appling AS5 to my laptop count for something

And I've done the l12 wire mod and unlocked the multies on a pali 1800+.

That's probably not all but that is what I remember right now.