Network Setup

[chaos]

I'm trying to set up a home network and i'm using MSI's PC to PC(USB). I can acces files through both computers, but I can't log on the internet or use my printer. Can someone give me a hand?? I think all my settings are right. I am using a cable modem if that helps any.

[PolyPill]

I'm not familliar with USB networking, but make sure you have TCP/IP installed for that network device.

[William]

you have any sort of internet connection software set up? You need something like Proxy from AnalogX, ICS, or some other proxy type program.

[pii100]

not shur but i think usb uses some propritary protocol i would install network cards in them you can get a pair for around 20 bucks

[Amedeo602]

USB never really was meant for networking. I'd recommend spending about $30 or so for a cheap pair of 10/100 network interface cards (NICs). Get those, a cat5 cable, a connector and a crossover cable and it's easy as pi to set up.

If you want the internet on both computers (duh) then get a router with a built in switch. I got a D-Link for less than $100 from amazon.com and it was easy to install and this way either (or both) computers can access the internet at any time, even if one machine is turned off.