P4 2.4ghz @ 2.8ghz And no more... (Pc info now :))

[Jimbob7]

I remade this thread because last time there was no info about my pc sorry :(

Would cpu-z screen shots be good enough??

[Ben721]

I don't get what your trying to accomplish. You still haven't listed if it's a C or what heatsink you have or what motherboard. Forgive me but I'm lost.

[Jimbob7]

Would screen shots from cpu-z be enough info :)

I have a jetway alioth ge intel 845ge motherboard

Memory is ddr pc2100

Zalman heat sink the all copper 7000cu i think it is will get a slk900 if i can overclock more :)

Version of p4 chip i have no idea :S i got it around xmas if that helps

[Jimbob7]

CPU-Z Report

--------------------------------------------------------------------------------

CPU-Z version 1.19.


CPU(s)
Number of CPUs 1

Code Name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.40GHz
Family / Model / Stepping F 2 4
Extended Family / Model 0 0
Brand ID 9
Package mPGA-478
Core Stepping B0
Technology 0.13 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 2411.9 MHz
Clock multiplier x 18.0
Front Side Bus Frequency 134.0 MHz
Bus Speed 536.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 2411.9 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits



Mainboard and chipset
Motherboard manufacturer
Motherboard model i845 ,
BIOS vendor Phoenix Technologies, LTD
BIOS revision 6.00 PG
BIOS release date 11/20/2002
Chipset Intel i845GE rev. B1
Southbridge Intel 82801DB (ICH4) rev. 2
Sensor chip Winbond W83627HF

AGP Status enabled, rev. 2.0
AGP Data Transfert Rate 4x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 128 MBytes



Memory
RAM Type DDR-SDRAM
RAM Size 512 MBytes
RAM Frequency 134.0 MHz
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
DRAM Idle Timer 16 clocks
# of memory modules 1
Module 0 Kingston DDR-SDRAM PC2100 - 512 MBytes



Software
Windows version Microsoft Windows 2000 Workstation Service Pack 4 (Build 2195)

[Bobby]

Sounds like you have a P4 2.4b chip (133mhz quadpumped to 533mhz)

I think your memory is what's holding you back, not the heatsink. The SLK900 with a high cfm fan will be a marginal improvement over the Zalman hsf.

I would recommend some PC2700 at a minimum. PC3200 being preferred.

-Bobby

[Jimbob7]

I know all pcs are diffent but how far could i go do u think??

3.2? :D

[Jimbob7]

Thanks for your help one more thing...

Do you know if my motherboard will take diffent speed ram at the same time?? eg leaving that pc2100 and putting in a pc3200? i doubt it but its worth asking

thanks again :)

[Bobby]

Looks like the majority of 2.4b users are getting 3.0 but they're all using at least PC2700. So w/o new memory, no, you won't be able to reach 3.2.

-Bobby

[Jimbob7]

thats wot i ment with new memory sorry didnt make it clear :( im in kinda a hurry :)

[Bobby]

Originally posted by [BBE]Jimbob
Thanks for your help one more thing...

Do you know if my motherboard will take diffent speed ram at the same time?? eg leaving that pc2100 and putting in a pc3200? i doubt it but its worth asking

thanks again :)

You can mix memory but you'll be running at the speed of the slowest memory module. So if you mix PC3200 with PC2100, you'll have to run at PC2100.

-Bobby

[Jimbob7]

Ok thanks alot you have been a great help :D:D:D:D:D:D