View Full Version : Intel CPUs
- OC a laptop
- 4GHz Club lifespan
- Am i reading cpu-z speeds wrong ? E6750
- Safety Question RE: E6750 OC
- e4xxx or e2xxx ?
- E6850 overclocking
- New to overclocking, is it possible?
- Mobile versions of Penryn CPUs?
- Spend $1,700.00 bucks for me.
- thinking about a X3220
- going from P4 to C2D, is it possible to use the same mobo?
- I can't seem to overclock my Q6600. Help
- Q6600 & P35-DQ6 help with OC
- Why is E6750 cheaper than E6600?
- 2.4 q6600 GO OEM
- Pentium M max temps?
- whats to warm for a P4?
- can someone help me please.
- Little help with a new build, hopefully SFF
- Help me run 500x6 Q6600 P5E3. Please.
- New Setup Q6600 Advice from the masters needed
- Intel's own 4x4 platform
- Q6600 and Asus P5N32-E O/C help needed
- Q9550 results...
- First time overclocker
- A little upgrade help.
- Another G0 Q6600 thread
- problems overclocking E2140
- Just to clarify TCase and Core temps
- New 2 OC'ing. E6750 + P35-DS4
- Skulltrail @ 5Ghz..
- Back to the lab with the Q6600 G0!
- CPU-Z reading low multi on e6750?
- penryn qx9650 4ghz no problem!
- ocing question with stock vs non relating to heat
- CORSAIR CMPSU-750 or CMPSU-620HX
- im so out of it
- 64 Bit or not?
- m
- My computer will simply not overclock!!
- Why am I so bad at overclocking??
- do I need to buy by batch for a new best oc E6750 or E6850?
- Steve's Q6600 installed
- Looking for a moderate 24/7 OC E6750
- How does Speedstep decide what multiple to use?
- Q6600 build and testing :)
- Quad core vs dual core...????
- Where to find GO Q6600?
- A little hot?
- Benchmarks - New Q6600 build.
- C1E stability testing
- Could use some help ocing LGA 775
- When I OC, I can't get into MY COMP properties
- E6750 owners, what voltage do I need to get to 3.6?
- Some Basic Questions on Q6600, Core Temp, etc.
- core2duo pc4200 ddr2 memory
- E4600
- Overclocking a E6300
- 1600mhz northwood?
- Q6600 Stepping Revisions??
- Microsoft Intel CPU reliabilty update
- Need some overclocking advice...
- Penryn Arrives: Core 2 Extreme QX9650 Review
- difference between G31 and G33?
- OCing and SATA ports prob
- Intel Q6600 Quad - FPO/BATCH Numbers?
- Newbie needs hardware help - Q6600
- How does this combo look?
- *Stupid* Question: Is My Proc 64 bit or Not?
- best northwood upgrade?
- Climbing up to 4GHz! (Q6600)
- P5K + Q6600 Vdroop issues
- A Quick look at Intel's Stock
- Q6600 Yay, 3.6 on air.
- Rumy's Q6600 Overclocking Results
- Something better available?
- Very low cpu score 3dmark 06
- e6300 @ 3.5ghz, temps ~50C idle, ~60C load. dangers?
- Calling all Psychics
- E6300 @ 3.0Ghz - Thoughts on my setup?
- Got Q6600 at 3.6 but temps....Need Help
- Need a little help please!
- Most bang-for-buck C2D?
- e6600 and latest p5w dh bios not good combo
- Price question about the Q6600
- FSB wall on core 2 duo's
- Not Much Difference with Freezer 7 Pro and Q6600!
- need help switching from AMD to intel
- To get a Q6600 or SLI ??
- Q6600 & Multithreaded Video Encoding
- Going to upgrade to Q6600, have a few Q's...
- Upgrade time, need opinions
- New 45nm CPU First Look-Intel C2D E8500 4.7G On Air Cooler
- where can i pre-order a penryn ?
- Need some help, out of ideas
- how far to overclock e6850
- Q6600@3.0Ghz at 70 degress full load?!
- Alright, I'm built! Now what?
- My E6600 is getting 28-30 degrees on Coretemp on stock fan....
- quick 45nm question
- Exx50s: why so cheap?
- pencil mod
- Some guided advice needed !!
- QX9650?
- Rough idea on performance increase?
- my new e6850
- Price cuts in Q6700?
- p4s800d...? skt 775?
- stability issue?
- How high can I theoretically go?
- I did it... Going Intel.
- My Q6600 and voltage/heat issues
- XEON 54xx Penryn Quads
- shipping LGA775?
- qx9650 cooler?
- e6850 voltage and OC
- I need to build a 'puter and I need it "future-proof"
- Another "Help me oc my quad" thread... :rolleyes:
- E2180 OC and Temps
- getting errors on one core
- prime95 cpu % ?
- 800FSB chips on 945 mobile chipset
- Awesome Q6600, high temps, what should I do?
- Best Mobo for SLI and 3600Mhz on a Q6600?!?!
- Help me OC my E6850 a bit more plz??
- Help me OC my E6850 a bit more plz??
- Help me OC my E6850 a bit more plz??
- orthos stress test
- Yet another Q6600 temps thread...
- 2180 woes
- Q6600 G0 Stepping Overclocking Problem HELP!!!!
- Xeon 3050 Temps
- MOBO help, have no clue what to look for (E6750)
- Which would you choose, PentiumD 945 or Core 2 Duo E4400?
- E6400 Came!!! Currently at 2.9GHz
- E6750 / PK5C / OCZ DDR2 1066 - what can I do with this?
- Pcmark 05 problem,trasparent windows result low
- e6700 problem
- Help! Unstable at stock
- can't get no higher
- E2160
- overclocking p4 519j
- Just a few questions E6400 & P5b-e board
- e6850
- please help !!! e6700 or e6750 ?
- worlds fastest C2D@ 16.92Ghz!!1!one!!11 (Parody-mod note)
- The fate of OEM cpus
- Modest OC on a E6750 system with little air cooling
- Any point in upgrading?
- First Look: QX9770 blows away Phenom
- LegitReviews got 4.51GHz on a QX9770 Water Cooled
- e6600 3.6ghz voltage fluctuations (vdroop?)
- Is it worth upgrading to the E2140 from my current cpu ?
- Quick E2140 question..
- Something bad happened =(
- Overclocking help plz....memory related.
- QX9650 on Water. It has begun..
- Tjunction on E4400
- Overclocking my Q6600
- Been out for 4 months need update
- Overclocking Q6700 to 3ghz need help
- E6750 Orthos and vcore questions
- E6600 runs slower when OCed.
- Wierd Q6600 temps when stressing?
- E2180, E4500, or wait for Penryn?? I need your help guys!
- Help overclocking my system.
- Q6600 @ 4.0GHz on air!
- Q6600 OC Results: 3.6GHz on air
- how much have you stabaly oc your q6600
- Q6600 build...a few questions
- need to clarify e6300 overclocking "memory issue"
- What Temps to use as a benchmark?
- Safely OCing e6750?
- E6550 on stock cooling?
- Pushing My E6600 Past 300 FSB
- xeon 3040, 3050 or E6750
- Coretemp and Speedfan won't read temps for four cores
- How far should I go on stock cooling?
- Question on AS5
- CPU overheating?
- Prime95 Error
- Question for OC out of USA
- can this be done
- Overclocking Striker Extreme
- Need an Explanation.
- E8500 Wolfdale Preview... WOW!!!
- suggestions for upcoming build and OC
- Mounting the Heatsink on a Socket 775
- What are your C2D E6750 & ASUS P5K-VM OC settings??
- QX9650 Sub Zero (I hope anyhow)
- Bored ? Dual core-Quad core OC review
- Bloomfield, Lynnfield, Clarksfield, Havendale, Auburndale ... ?
- cpu inquiry
- Overclocking Dell E520 | E6300
- my NewB shines: E6850 or E6750 for best OC w/Ballistix: Mult. What Mult!
- Q6600 on Vista 64 bit
- i have just ordered these
- Q6600 Overclock New Member
- Trouble overclocking e6600...
- For all the little people!
- Getting back into the swing of things
- My Q6600 G0 wont even load at 3.6ghz
- G0 Step E6550 VS M0 Step E4500
- 450mhz wall with Penryns
- Roadmaps on main page
- Need Help with a stubborn e2160
- cheap core2duos
- Pentium Dual Core (E2160) on the ASUS P5WD2-E
- Anyone over 3 stable with a Q6600 and Striker extreme?
- New here, bit of a problem
- x3210 g0 ocing part 2, cooling advice?
- Crossover from mendocino celeron to P3
- E2140 Dual-Core Processor
- new processors verse older ones
- Noob OCing Q6600(G0)
- Can't OC to old settings
- My E6600 and P5K adventures!
- Advise on upgrade
- E2160 Overclock?
- new unopened E6750: what do codes tell me, is it a G0?
- upgrading laptop proc question
- Thinking of making the jump from amd
- max vcore on 2160?
- CPUZ misreads multiplier
- So the capped multi on the new penryns
- P4 Presscot 3.0 vs Celeron D430 O/Ced
- amazed by E6750
- higher fsb - lower temp???
- My quad is lazy...
- Q6600 Overclock , Very Happy
- Very happy with my "cheap" placeholder E2140
- Very happy with my E6550 2.3Ghz @ 3.5Ghz on air!!!!!!
- Celeron D 3.4Ghz
- My Personal E4400 overclocking on the cheap
- Why aren't you lot folding for team 32?
- About overclocking E6750
- E2140 or E2160? help please
- Sell my B3 and buy a G0
- temp monitoring for toshiba c2d
- ibm thinkpad, temp monitoring, centrino cpu
- Which Motherboard for Q6600 + SLi ?
- Q6600 OC Prime temp questions
- Q6600 OC results
- HELP! I need a cheap CPU w/ EM64T to hold me over until Penryn
- Q6600 G0 Stepping?
- Dual to Quad...be honest now
- 2.8Ghz safe for an E6550 with standard cooling?
- Need help building my friend a PC!!!!
- E6850 + 680i and CPU-Z Readout/ OC HELP :)
- need help OCing, quick question
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.