View Full Version : Intel CPUs
- cedar mill p4 631 or pentium d 915?
- e6600 + Lapped Tuniq Tower w/ 150cfm Delta Fan + NJ Winter = COLD
- Intel Pentium D 805 Dual Core 2.66 GHz cpu
- New rig
- Rate my new system please
- 1st time OC sanity check
- Help please stuck 2.7
- E6300 dual core on XP2
- NEED PRO HELP OC'ING CONROE!
- Small question about temperatures.
- Please suggest MB/RAM for QX6700 Kentsfield
- Cannot overclock e6600 after going from 2gb to 4gb of ram
- Cannot overclock pass 400 fsb
- Need a good overclocking Mobo
- CPU/MB for $350 ...
- Allendale Max OC thread (E6300-L2, E6400-L2, E4300-1066strap)
- NEED SOME SERIOUS HELP!
- Difference from Core Duo and Core 2 Duo
- New Intel chip does 1 trillion calc./sec
- New biuld Noob question
- New CPU and Memory
- QX6700 extreme or X6800 extreme
- Dell Factory Overclock Option
- CPU Change
- e6300 vcore question
- Pentium D 915 @ 4GHz !
- bluescreen and failing orthos
- e6400 first overclock, hows it look?
- First OC on my new rig...
- Problem Solved: E6300 Running Hot
- Anyone using the Asrock 775Dual-VSTA ?
- OC succeed after PSU change ...
- New Rig. What to expect?
- E6300 + P5BD Fluctuating Multi
- TEC Cooler + c2d 6600 oc
- Strategy for Overclocking?
- e6600 + 8x Multi = Incorrect CPU Speed in Windows?
- Nice e6600 OC- aka, my brother is a lucky...
- Newb w/ E4300 and DS3 needs help!
- New to Intel, lil help please.
- picked up new system, e6600 asus 680i chipset water cooling help with OC'ing
- QUESTION: Why no overclocked systems on Ebay?
- Hello, New around here, just had some ??'s
- What mobo with Quad?
- Help me Build my Quad Rig
- What OC could I expect from $600 and a E6400/6600?
- How things have changed
- Intel D930 vs Pentium 4 670 stock speeds?
- Going Farther on Stock Voltages (e6600)
- E6600 F Steping Woows.. :(
- New E6300 machine and steps for clocking it??
- 3.6 Ghz on air
- E6300@2.9GHZ Good?
- First OC
- E6300 help (cant OC past 2.40)
- One question before my decision on new pc build, pls
- 1st time builder, overheating issues
- Intel newb considering switch from AMD, any suggestions?
- E6600 or E6700?
- How can I check CPU temp?
- audio pc/would like to overclock
- Who is the idiot?
- CPU advice needed (not a newbie)..
- What are my E4300 core temps?
- My [amazing] new e6300
- New system results so far
- 3dmark06 crashes with new C2D OC.
- Should I upgrade or buy a new laptop? (Pentium M 1.6ghz vs Core 2 Duo 1.6ghz)
- GOD I love the C2D 6600. Finally found an OC I can live with.
- What am I doing wrong?
- Anyone have this ram?
- overclocking my e6600
- www.shutdownday.org
- duel core CPUS
- P4-M help?
- Where is Watchdog?
- Upgrading at last, E6600 needs a new kit!
- Is this overclock right on my C2D E6600
- Newbie Overclock question
- Processor would not slow down
- OC E6600 vcore vdroop and safe settings
- Im Lookin for a C2D E6700 Cooler, Quite Light
- Why is CPU 0 always 3C cooler than CPU 1?
- How's this overclock on my E6400?
- This any good?
- Pentium D Dual or Core 2 Duo ?
- Wanting to upgrade to Core 2 Duo Processor
- Core 2 Duo E6400 changing speeds??
- E6300 wont overclock
- New Socket Late 2008
- e-6600 oc'ed @ 3.2 but...
- xeon 3060: poor 3dmark06 performance, multi changes in cpuz
- Finally, My Q6600 quad core is here.
- 10ghz oc on e6300 cpu-z fault? pictures inside help needed
- How much vCore fot this e6300 setup?
- NEW system chim in please
- Conroe + Asrock oc post your results
- Who's waiting for the price drop?
- Pentium D OC
- P3 Mobile Question
- pentium d in dell xps gen 4?
- New C2D system Specs
- Need Help OC'ing my E6600
- Opteron equivalent of CD2?
- Need advice on overclocking e63/6400
- E6400 @ 3.6 Stable on Stock Air
- Won't boot past 3.42GHZ???
- RAM timings
- Booting problems
- QX6700 - to aircool or watercool? Advice needed
- Help oc e6600 / D975XBX2 / DDR2 800
- Settings for E6300-Ab9 Pro-Gskill DDR2 800
- E6600 overclocking help please!
- E4300 + Ds3 rev 1 F10 Bios Overclocking Begins
- e6300 overclock?
- E6300+965S3+WCing. Is this board maxed out?
- Overclocking Kentsfield on AIR
- Want to help me OC?
- Need Intel ppl advice :)
- NEW Intel Price drops!!!
- Explain me this...
- Help overclocking P4 2.6 ghz
- My E4300 results! Temp Confusion.
- Please give opinions on my Temps - E6400 @3.52Ghz/1.46v actual
- Is Ceder Mill the Last Celery?
- 4300 unstable
- e6600/badaxe 2 question
- Finalizing c2d build..opinions?
- prime95 walkthrough for my new c2d system
- Default Vcore for e6600?
- e6600 Orthos Stable 3200mhz (400x8) 1.2volts.
- Xeon E5310 Clovertown - cheap?
- Hyperthreading and Dual Core CPU's.
- Xeon 3060 or e6600
- E4300 even more strange
- List your heatsink for: Intel Core 2 Duo E4300
- P4 2.4 Northwood 533mhz Overclock advice
- Please help an OC newb with an E4300 setup...
- Need some help picking a cpu
- Failure time for Overclocked CPU's
- E6300 Temp
- E6600 temp?
- Best Laptop for 1500
- e6600 + mach II gt
- Planning on doing a C2D build in april or may, just a few questions.
- MCH Voltage @ 1.5V, Questions?
- About PIN mods in general..
- Xeon 3060 users
- Is this system out of line?
- Upgrade advice
- E6600 Speed Problems
- FACE Intel
- BEFORE's X6800 L624A under LNē [CPU-Z@5.46GHz - Spi 1, 2, 4, 8, 16M]
- Dramtic Temp Change? [Images]
- Dual Core 4ghz vs C2D 2Ghz (merom Laptop)
- xeon 3060 any board
- A Noob Question
- E6600 overclock help
- Could my C2D be damaged?
- 5 Ghz P4 631 on air is this normal?
- E6600 or E6700 for OCing???
- Noob OC...
- First overcock E6600: need help.
- Individual core temps are lower than combined CPU temp?
- upgrading Compaq Armada M700
- ASUS P5N SLI board
- April Launch Details
- Some extra caah around...
- Which produces more heat???
- e6600 OC - mulitplier not behaving..?
- Non Overclock Presler failure - spontaneous...sorta
- can some help plz
- My ultimate plan to take over the world
- E6300 vs E4300?? Which one shall I buy?
- Interactive Vcore pinmod for 775
- Cpu-z says..
- HELP !!!!! Temperature 82 C !! (E6600)
- HELP !!!!! Temperature 82 C !! (E6600)
- Overclocking an E6400
- OC'ing and DVD ???
- Crazy Idea?
- Pentium D Multiplier?
- P4 3.2 vs PD 820?
- Will a Yonah work in a Radeon Xpress 200M?
- E4300 Overclocks
- oldie needs some help :(
- Is there something wrong with my E6600?
- Wierd Problem. Need some help please.
- Unstable overclock!!!
- How to increase FSB Further? (Memory Advice)
- New here , need some help with new setup :)
- Should I go further(e6300 oc)
- I COULD NOT WAIT HERE IT IS
- c2d 4300 build comments welcome
- Lowest stable vcore for e6600
- E6400 at 2.88Ghz, want to go higher
- Core 2 Duo Prices?
- Need advise on OC settings-where in Bios?
- Running a bit hot a little concerned.
- First real OC, just checking
- What's the best 771 desktop motherboard?
- is this a decent clock?
- my dream machine, or is it?
- How am I doing?
- DELL advertising t2060 as PD instead of core duo????
- Spilled arctic cleaning 1 solution on cpu asggghhh
- Something wrong...
- Yonah 1024 machines
- stability testing with orthos
- >800Mhz with 4 sticks
- newbie over clocker needs some feedback
- Just Ordered a Conroe E6600....good move?
- E6600 and Intel D975XBX2
- Doh! First crash in over a year!
- E6300 and Asus P5B
- Plz help me overclock my Cpu
- Chances of getting an E4300 to 3GHz with stock voltage and cooling?
- Overclock Help
- Music Studio PC Build. Need Help!
- cpu:dram ratio?
- whoa amazing clocking chip.????
- P4 2.4 Ghz 478 OC
- First overclock - Problems
- decent e6600?
- is my cpu on fire or is this normal?
- Looking for some advise.
- E660 . . . . Need to go further
- Want to overclock my 6600 and p5b...
- e6600 Overclock Results
- HelpMeCompleteMyRig 4 EndOfApril
- e6600 or e6700?
- any double dual core boards
- Core 2 revisions and 680i sli chipset
- e4300 low vcore?
- characteristics of e6600 + p5w dh
- OC Newbie Help with E6300 and Asus P5B Deluxe Wi-Fi AP
- Going C2D. need some help with parts
- Pentium D 805 Default Voltage?
- a little Preshott action
- 1st try at Overclocking my E6600 worked great!
- some problem
- Will there ever be a Pentium 5?
- just curious
- core temp
- 3.06 nothwood worth $$$$?
- Which is better ? Intel Celeron D 3.2GHz or C2D
- E4300 Vs E6600
- I need help, 805-D + P5B-VM = 2.9 GHZ.
- worth upgrading graphics in a comp with 2.8ghz single core pentium?
- serious nOOb with e6300 and big dreams
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.