View Full Version : Intel CPUs
- voltage?
- What is needed to RMA an intel cpu?
- Weeks and steppings
- How cool is your 1.0A?
- Help P4 Box Letters!!!
- How do u OC this?
- i have a need for more speed!!
- Pentium4 1,6A@2,4
- my new setup
- Celeron in CUSL2-C
- the 1.8 that could
- Not too bad?
- 1.6 Northwood @ 3016Mhz !
- hows this score??
- Help w/ an Intel Slot1 Rig
- Outdated proc q
- Outdated proc q
- First time O/C with 1.6A
- pci divider
- rethinking new computer
- Are all P4 2.2's Northwoods?
- HOW DO I OC ON A p4s333 on bios 1006J
- vcore mod. tualatin
- cpu fans...
- AGP 2x and 4x
- Overclocking
- 1.6 Northwood @ 3131Mhz !
- L2 ECC Cache...
- 2.4Ghz P4 Northwood (533FSB)
- New Tualatin Stepping
- 76C?!?! How could this be?
- How to figure out week code on my 1.6a?
- 8086 oced to 1 ghz (pictures)
- Is this a good overclock setup?
- anyone gettig 3ghz with a 2.26 cpu pleae read
- overclocking setup with p4 1.6A
- some tips pls
- help CUSL2 with 370/t
- Choice of P4 model?
- New Pentium III
- Hitting 3ghz.... questions on the memory...
- 2.2ghz & 2.2Aghz pentium 4 Xeons!??
- 1.4GHz PIII-s does 1640MHz on default vcore. Nice! My latest and greatest.
- The best way to o/c a pentium2?
- What are these CAS numbers?
- Page_Fault_In_NonPaged_Area
- CPU linear freq?
- INTEL Pin datasheet of slot1 or slotckets...
- Who do I trust...
- I want to OverClock a P4 and dont know where to start!!
- Before i place my order, which 1.1 gig Tualatin do i want?
- Is it time?
- Im such a newbie, how do you change the fsb?
- p4t-e jumper setting
- That hole on the P4 IHS???
- give me the names only
- Look at my shopping list
- Need some advice guys
- Booting up Windows after OC'ing
- What is up with my 1.0A?
- 2.66 / 2.60GHz CPUs To Come August...
- Is this a good 1.8A?
- V Pin mod 4 pins what lower voltages are available.
- Cooling 1.4GHz with chipset cooler. HUH?
- What is a good motherboard for a PIII 800?
- What would you do?
- Collected info and resources for those intending to run a Tualatin on BX/Slot1 mobo!
- Couldn't help but post my 1.0A results
- Dudes...I'm gettin a Dell Laptop!
- 2.2 or 2.26?
- Can u OC intel boards?
- water cooling overkill?
- 2.0A and P4S533 - What do you think?
- Slockets for tualatin?
- RDR or DDR with a p4 2.26GHz oc -> 3GHz???
- CEL 1.8 question
- Anybody made a p4 2.26ghz to 3ghz using RDR???
- sad news for me...
- P3 500Mhz Slot.... How Much can u OC?
- New to Intel..Help!
- best ddr motherboard
- My 1.2gig Celeron @ 135fsb :)
- I removed the heatspreader from my pIV
- p2 400 (100*4) @ 400(113*3.5)..better performance?
- booting problems...
- General Queries about O/C of P4 2.2/Rdram combo
- Question about P3 500 and MoBo
- need help with a celery 733 please
- RDR/DDR mobo for my P4.
- Pentium 4 1.6a running slower at higer FSB?
- help with modded p3 700 on 810/ ram issues
- more stability issues...damn BSOD
- Stupid Stupid question
- Overclocking Celeron 366
- the saga continues...
- Unlocked P2 in my hands
- shes almost there....
- Optical Shrink of P4 2.26b
- Ax-7
- bois settings
- Is there any way to unlock a P4?
- What motherboard Upgrade from slot1 to fcpga2?
- Abit BD7-II & P4 2.26B OMG
- Goodbye 1.6a, old friend (sniffle, sniffle)
- P-III 800 overheating?
- P4 1.8A on P4S533.....slow loading....
- p2 400mhz with intel SE440BX-2 OCABLE?
- How much OC can i get of p4@2.26Ghz with stock fan?
- PIII 667 @ 795 restarts my computer on its own?!
- need help OCing
- Rock and a Hard Place
- temperature stays same?
- Looking at intel
- max idle/max load?
- Soundblaster Live Drivers for Windows 98
- Diff between locked and unlocked
- succesfully overclocked Duron 1000
- I Sold My Best Friend! What Should I Get Now?
- Overclocking
- Malay packdate19/04/02 2.4b any good?
- P4 1.6a or p41.8a
- Socket 370 fcpga2 Chipsets
- P4 1.6 Overclocked at 2.61 (EPoX 4G4A+) faster than 2.53??
- Question for the Intel Users
- P4 1.6a @ 2.133 .. BD7II-RAID, inaccurate temperature sensors, PSU?
- What cpu is this???
- Make that Tualatin celeron a p3!
- oc suggestion?
- Celeron 1.0 & 1.1Ghz FCPGA cpu info, plz Help!
- oc suggestion?
- how to o/c 2.0a...
- Overclocking a 233Mhz
- Temperature
- P4 NW Volt mod... anyone have success on an Asus P4S533?
- Question to All OC Gurus 1.8A vs 2.4B
- Getting the right setup for my P4 1.8
- Anyone with a socket 7 pentium lying around read this...
- Intel 1.7 Xeon 16-bit ???
- Problems using XMS 3200 3:4 w BD7II..
- Should I buy a 550W PSU, or not???
- Increasing Vcore
- Do these benchmarks look good?
- Where buy a 1.2 Cele w/128 cache cheap????
- 1.8a phillippines?
- how can i hit 3ghz?
- 166 @ 300
- DDR Newb Questions
- quake 3 locking up at only 120fsb?
- mendocino L2cache speed
- Overclocking the Asus P4S533
- Highest Pentium Overclock
- Highest Recorded Pentium 4 Overclock
- 800 Celeron doing funky things
- multiplier vs fsb
- should i volt mod?
- CPU/Mem Ratio
- GF4 + P!!! 700@980 ...enough!?
- memtest error on test3 and 4, no errors t 100FSB
- speed check
- I removed the ihs
- How can i get the honest speed....
- Asus Mobo? More pwr w/this...
- Help! Best FPO/Batch For OC??
- burn baby burn!!!
- p55C Pentium MMX in a socket 5 motherboard?
- p4 423 Heatsink?
- HELP! Need too much voltage
- guys check this out!!
- 2800MHz Pentium4 in September!
- Over Clocking Help
- Burn in?!?
- HELP!! Overclock a P4 2A
- How much wattage?
- P2B with Powerleap adapter and Tualatin
- Anyone know when Intel announced price cuts?
- will runnin a 1.6a @ 133fsb add heat and reduce component life?
- Need help with new Abit-th7II and P41.6a
- n00b question about the woodie's fsb
- Most under voltaged NW
- dO CLERONS OVERCLOCK WELL?
- Low Benchmarks
- I am converting to Intel from AMD...HELP
- Itanium or Xeon?
- w00t about to build first intel rig. ordered parts today.
- Dual Fan CPU cooling
- how do I hit 4GHz?
- 50% P4 Oc?
- need help overclocking a pentium2 233 yes im serious
- 2.26B + IT7 fixed fsb problems. (Wierd)
- Itanium or UltraSPARC?
- CPU prices
- Help! Celeron 1.2 - what's wrong
- No Dial Tone
- 1.8a @ 3ghz =D
- System Recommendations?
- I'M DESPERATE !! => Whats wrong with my 1.6A / 2.4 O/C ?
- Vid pin Pentium4 More than 1,85VCore
- how good to p2 overclock?
- The latest pack date of 1.6A?
- Help a Celly o/c newbie!
- PII 266: Darned heat sink won't come off!
- starting to o\c my 1.8a
- Dell P4
- how many loops is enough?
- Cant Overclock My PIII
- Software to increase Mhz
- who's fried their northy & at what voltage
- Finally 13000! Thanks to my 2.26b!
- check this out.... need help bringing someone to the light side
- Unmatched CPU Performance From A Celeron...
- Just got my 1.6a in the mail...
- 3d Marks
- oc problem! please help
- OverClocking conflict with DSL!!!!!!!!
- Ol' man HElP! PLZ!
- Some(Clear) Pictures of my P4 1,6A(vid pinned)
- Does asus cuv4x MB support 1GHz CPUs??
- Need help overclocking 2.26b w/ Gigabyte 8IHXP and RDRAM 1066
- ??Higher Speeds Possible??
- what does a intel 2 SMT mean?
- 1.6 - 2.0
- Overclocking a CPU
- How To Capsure Pics from Movies
- Finally Removed IHS, But Problems
- Need Pro Help with oc
- overclocking cpu speed fix for windows error! READ!!!
- P4 1.7 gig and celeron same thing
- CUTE Software CPU Load!!!!!!
- Setting FBS TO 133
- How are my 1.6a temps?
- For the new members-How can you "read" the FPO\BATCH
- 1.1 Cele-T at 133 fsb.
- Got The 1.1a Celly Today
- OCing Question
- hase eneybody tried this abit bx2
- thinking about it...
- Celeron 1.4gig info needed
- My 2.26b is only 11398% better than a p2 400
- Old Celeron...changing the voltage?
- Ok i got it all toghter now and going P4..
- Is this a good 1.8A P4 ?
- asynchronous mode for fsb:sdram:pci freq
- Strange crash. Please help!
- 4 and 5 GHz P4 OC's seem more than possible
- How do I overclock a P4 2.26b
- what do i need to change?
- jd, look at this...
- Need help upgrading PC on a budget
- 1.4GHz PIII-s hti 1.79GHz on air. Pic inside, no benchies.
- Slot Number for PIII
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.